Audemat Audemat
FM-MC4

When running sequencer software for the first time, the following message can appear

This means that Audio/modulation software communication port has not been previously configured.
Please refer to the Audio/modulation documentation page 30 in order to correctly check and configure this parameter. Once this operation is done this message is no longer displayed during SEQUENCER running.
How can I control the Goldenear campaign size recorded?
In the Goldenear campaign software click on Campaign folder.

Check the Size / minute parameters.

The size recorded depends mainly of the AUDIO recording format.

During the campaign the GOLDENEAR measurer module display the time left before the full filling of the hard drive (Or the limit at 2 Gbytes). Express in Hour : Minute : Second.
How can I easily copy a FM-MC4 campaign?
A campaign is composed of several files.
Minimum 7 files *.CGN, *.ANT, *.CFG, *.CLQ, *.ETL, *.GPS, *.T01 + 1 file by station configured and measured.

In the menu FILE select CAMPAIGN HANDLING\COPY A CAMPAIGN

Select the directory and the campaign name to copy then the directory and the campaign name destination. Automatically all the files of the campaign selected are copy in the directory chosen.
How to import my FM-MC4 data onto Mappoint?
It is necessary to export in a text file the fieldstrength data and the degree coordinates (it's the most important!). Then, import the data onto Mappoint.
How to fix the communication problems between my FM-MC4 and my PC under Windows XP?
There is a patch which fixes communication problems with the equipment if you are running Windows XP.

Follow the steps hereafter to apply this patch:

  • First, download the file "MC3COMM2.DLL" in the FM-MC4 dowloads page.
  • Close all running Audemat programs.
  • Then, replace the old file in the "System32" directory, located in your Windows directory (for example, "c:/windows/system32" or "c:/winnt/system32").
    • In the sequencer software, when running the current sequence, a message box indicates that the Audio analyser must be closed. Even if no audio analyser instance is running and this message does not disappear

    Use the Windows task manager to close the SEQUENCER running instance and start audio/modulation software. Check that calibration file is correct according to Audio/modulation documentation page 46/47.
    Then close audio analyser software. A popup message asks you to save the current configuration. Answer YES to this message. Once this operation is done the message is no longer displayed during SEQUENCE running.

    You have not found needed information? You can contact our Technical Support.