T2035 DVB-S

MPEG2 DEMULTIPLEXING-DECODING FUNCTIONALITY


  • The extracted MPEG2-TS from the QPSK Front-End or from the ASI input is analyzed according to ETR 290
  • The elementary audio and video MPEG stream selected by the user are uncompressed
  • The video signal is then converted from digital to analog and coded to the color standards: SECAM, PAL.
  • The composite signal is output on a BNC connector at the rear of the equipment.
  • Simultaneously the RGB color components are provided on a D-SUB /HD 15 pins (VGA type) connector.
  • The audio channel are output on XLR 5 type connector.

INPUT-OUTPUT MPEG2-TS


  • The extracted MPEG2-TS (Transport Stream) main stream is provided on both of the ASI (Asynchronous Serial Interface) outputs according to the specification EN 50083-9.
  • Bit rate: 270 Mbits/s
  • Packet size: 188 -204;
  • Burst or punctured data
  • An ASI input to access the MPEG-2TS demultiplexer-decoder is also available.
  • Bit rate: 270Mbits/s
  • Packet size: 188 -204;
  • Burst or punctured data

ALARMS FUNCTIONALITY

The equipment provides an alarm for each measurement. The alarm threshold can be set individually.
4 synthesis alarms are provided: they allow the combination of 2 or more alarms according to a scheme defined by the user.
Access to theses 4 alarms is provided on dry contacts at the rear.
On the front panel, 3 pre-defined synthesis alarms (RF, COFDM and MPEG) and 4 user defined synthesis alarms are displayed on 6 LED.
Alarm status can be accessed through the serial link or remotely (see below)
If option, SNMP “traps” can be sent on user demand over Ethernet.


REMOTE CONTROL


Through dry contacts: 4 user’s defined synthesis alarms and “power supply on” are available.
Remote Reset is allowed by strapping 2 contacts on the “dry contacts” connector.
Through RS422 serial link: a console monitor allows access to all the functions of the equipment: configuration, measures, and alarms.
Through an Ethernet PCP/IP proxy board, full remote control is available using HTTP, FTP, SNMP protocols.
Web server embedded.